Return to search

Improving shipboard maintenance practices using non-intrusive load monitoring

Includes bibliographical references (leaves 49-50). / Thesis (S.M. in Naval Architecture and Marine Engineering)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007. / (cont.) New casualty parameters were recorded and analyzed in an attempt to verify and expand on diagnostic software currently being developed for the vacuum aided sewage collection system. The analysis of the ships service compressed air system provides an example of what immediate diagnostics such software would be able to provide for the user. Additional analysis of a misaligned ventilation fan provides evidence of the NILM's ability to constantly monitor steady state systems. The expansion of testing onto the ESCANABA provides valuable verification of previous data collected onboard the SENECA during past research. / The Non-Intrusive Load Monitor (NILM) is a device that utilizes voltage and current measurements to determine the operating profile and individual loads on a system from a single aggregate measurement. The NILM can also be used to actively monitor and quickly diagnose system failures or improper operation. Current NILM research conducted at Massachusetts Institute of Technology's Laboratory for Electromagnetic and Electronic Systems (LEES) is exploring the application and expansion of NILM technology for the use of monitoring shipboard systems. This thesis presents the implementation of the NILM on a vacuum aided sewage collection system, a ship's service low pressure compressed air system, and a vane axial ventilation supply fan. The NILM's ability to the monitor the power usage profile of these systems could be used to immediately diagnose system casualties and unusual operation parameters. Measurements and experimentation were conducted onboard the USCGC ESCANABA (WMEC-907) and the USCGC SENECA (WMEC-906), 270-foot Coast Guard Cutters home ported out of Boston Harbor. / by Mark A. Piber. / S.M.in Naval Architecture and Marine Engineering / S.M.

Identiferoai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/39882
Date January 2007
CreatorsPiber, Mark A. (Mark Augustin)
ContributorsSteven B. Leeb and Robert W. Cox., Massachusetts Institute of Technology. Dept. of Mechanical Engineering., Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
PublisherMassachusetts Institute of Technology
Source SetsM.I.T. Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format50 leaves, application/pdf
RightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission., http://dspace.mit.edu/handle/1721.1/7582

Page generated in 0.0016 seconds