Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2016. / Cataloged from PDF version of thesis. / Includes bibliographical references (pages 56-58). / Cooling demands of advanced electronics are increasing rapidly, often exceeding capabilities of conventional thermal management techniques. Thin film evaporation has emerged as one of the most promising thermal management solutions. High heat transfer rates can be achieved in thin films of liquids due to a small conduction resistance through the film to the evaporating interface. In this thesis, we investigated evaporation from nanoporous membranes. The capillary wicking of the nanopores supplies liquid to the evaporating interface, passively maintaining the thin film. Different evaporation regimes were predicted through modeling and were demonstrated experimentally. Good agreement was shown between the predicted and observed transitions between regimes. Improved heat transfer performance was demonstrated in the pore level evaporation regime over other regimes, with heat transfer rates up to one order of magnitude larger for a given superheat in comparison to the flooding regime. An improved experimental setup for investigating thin film evaporation from nanopores was developed, where a biphilic membrane, i.e., a membrane with two wetting behaviors, was used for enhanced experimental control to allow characterization of the importance of different design parameters. This improved setup was then used to demonstrate the dependence of thin film evaporation on the location of the meniscus within the nanopores. This dependence on meniscus location within the pore was also shown to increase with increasing superheat. We observed a 46% reduction in heat transfer rates at a superheat of 15 °C for an L* of 14.67 compared to an L* of 2, where L* is the ratio of the depth of the meniscus within the pore to the pore radius. This work provides practical insights for the design of devices based on nanoporous evaporation. Heat transfer regimes can be predicted based on fluid supply conditions, evaporative heat flux, and membrane geometry. Furthermore, the biphilic membrane serves as a valuable experimental platform for testing the role of membrane geometry on heat transfer performance in the pore level evaporation regime. Future work will focus on demonstrating the importance of different parameters and using experimental results to either validate existing models for evaporation from nanopores or develop more suitable ones. / by Kyle Wilke. / S.M.
| Identifer | oai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/104571 |
| Date | January 2016 |
| Creators | Wilke, Kyle (Kyle L.) |
| Contributors | Evelyn Wang., Massachusetts Institute of Technology. Department of Mechanical Engineering., Massachusetts Institute of Technology. Department of Mechanical Engineering. |
| Publisher | Massachusetts Institute of Technology |
| Source Sets | M.I.T. Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 64 pages, application/pdf |
| Rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission., http://dspace.mit.edu/handle/1721.1/7582 |
Page generated in 0.002 seconds