Master‘s thesis deals with the preparation and evaluation single-phase high-entropy alloy based on cobalt, chromium, iron, nickel and manganese and its variants strengthened by dispersion of oxidic particles. High-entropy alloy was prepared in powder form by mechanical alloying from the equiatomic proportions of atomic powders. Obtained powder was subsequently compacted by spark plasma sintering. By the method of mechanical alloying were successfully prepared single-phase high-entropy alloy and its variant strengthened by dispersion of nanometric yttria oxides. It has been found that the oxide particles present in the microstructure of high-entropy alloy significantly block mobility of grain boundary and dislocation at elevated temperatures. As a result of this behavior were observed doubling of alloy strength and decreasing of creep rate at 800 °C.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318856 |
| Date | January 2017 |
| Creators | Pišek, David |
| Contributors | Šiška, Filip, Hadraba, Hynek |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0061 seconds