Return to search

Ternary Nanocomposites Of High Density, Linear Low Density And Low Density Polyethylenes

In this study, the effects of organoclay loading, compatibilizer loading and polyethylene type on the morphology, rheology, thermal properties and mechanical properties of polyethylene/compatibilizer/organoclay nanocomposites were investigated. As compatibilizer, terpolymer of ethylene-methacrylate-glycidyl methacrylate (Lotader&reg / AX8900), as organoclay Cloisite&reg / 15A were used. All samples were prepared by a co-rotating twin screw extruder, followed by injection molding.

Considering ternary nanocomposites, highest impact strength results were obtained with 10% compatibilizer plus 2% organoclay / highest yield stress, elastic modulus, flexural strength, flexural modulus were obtained with 5% compatibilizer plus 4-6% organoclay.

DSC data indicated that addition of organoclay and compatibilizer did not change the melting point remarkably / on the other hand it affected the crystallinity. The organoclay used had no nucleation effect on polyethylene, and the compatibilizer decreased the crystallinity of the matrix.
X-ray diffraction showed that in all ternary nanocomposites and in binary nanocomposite of high density polyethylene with organoclay, layer separation associated with intercalation of the clay structure occurred,. The highest increase of interlayer gallery spacing was obtained with 10% compatibilizer plus 2% organoclay, which were 25%, 28% and 27% for HDPE, LLDPE and LDPE matrices respectively.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12608446/index.pdf
Date01 June 2007
CreatorsUcar, Egemen
ContributorsYilmazer, Ulku
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for public access

Page generated in 0.0017 seconds