This diploma thesis deals with finding copper alloy suitable for processing SLM technology and determining the process parameters leading to a relative density close to the full material. The theoretical part provides an insight into additive technology and the processing of new alloys in SLM. Work also contains a search report of processed copper alloys used in SLM. Based on the theoretical part were designed test samples and method of evaluation. Samples were produced by melting metallurgical powder using ytterbium laser with an output power 400 W. The testing is divided into three stages; Determination of the parameters of the SLM process, Debug strategies for larger parts, Geometric precision and mechanical testing. Based on the results was determined dependence of relative density on the input parameters. For the best parameters were determined geometric precision correction and mechanical properties.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241911 |
Date | January 2016 |
Creators | Kočica, Martin |
Contributors | Šafka, Jiří, Paloušek, David |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds