Return to search

Aplicação de membrana cerâmica no tratamento de água produzida: modelagem e simulação.

Submitted by Gustavo Nascimento (gustavo.diniz@ufcg.edu.br) on 2018-02-07T12:18:32Z
No. of bitstreams: 1
RAISSA MENEZES DE SOUSA - DISSERTAÇÃO PPGEQ 2016.pdf: 3574277 bytes, checksum: fc3f9b72fefbf347de741a28f9bed6b6 (MD5) / Made available in DSpace on 2018-02-07T12:18:32Z (GMT). No. of bitstreams: 1
RAISSA MENEZES DE SOUSA - DISSERTAÇÃO PPGEQ 2016.pdf: 3574277 bytes, checksum: fc3f9b72fefbf347de741a28f9bed6b6 (MD5)
Previous issue date: 2016 / Capes / Diversas tecnologias tem sido utilizadas para tratamento da água produzida
(mistura água/óleo). Os processos de separação por membranas (PSM)
apresentam vantagens sobre outros métodos tradicionais de separação, contudo
alguns problemas operacionais atrelados aos PSM, como polarização por
concentração, fouling e formação da camada gel, causam o decréscimo do fluxo
permeado com o tempo. Sob condições onde os efeitos da polarização por
concentração são mínimas, o escoamento será afetado pela pressão
transmembrana. Assim, foi realizado um estudo da fluidodinâmica de uma
mistura água/óleo utilizando membrana cerâmica, com auxílio do software
ANSYS CFX® Release 15.0. Foi desenvolvido um modelo matemático com um
fluido incompressível escoando em regime turbulento. As equações de momento
linear, conservação e transporte de massa foram resolvidas com o auxílio de
uma malha estruturada. Os resultados da simulação apresentaram os seguintes
resultados: a modelagem matemática previu numericamente o processo de
filtração tangencial via membrana cerâmica no tratamento de água produzida;
observou-se que em vazões muito baixas há uma maior concentração de óleo
próximo a membrana enquanto em vazões elevadas, o óleo fica disperso na
mistura, onde há a quebra da camada limite; os efeitos viscosos não apresentam
diferenças significativas nos perfis de concentração e velocidade. / Several technologies have been used to treat the water produced (water / oil
mixture). Membrane separation processes (PSM) have advantages over other
traditional methods of separation, however, some operational problems related to
PSM, such as polarization by concentration, fouling and formation of the gel
layer, cause a decrease in permeate flow over time. Under conditions where the
effects of concentration polarization are minimal, the flow will be affected by
transmembrane pressure. Thus, a study of the fluid dynamics of a water / oil
mixture using ceramic membrane was carried out with the help of ANSYS CFX®
Release 15.0 software. A mathematical model was developed with an
incompressible fluid flowing in a turbulent regime. The equations of linear
momentum, conservation and mass transport were solved with the aid of a
structured mesh. The results of the simulation presented the following results:
mathematical modeling numerically predicted the process of tangential filtration
via the ceramic membrane in the treatment of produced water; it was observed
that in very low flows there is a higher concentration of oil near the membrane
while at high flow rates the oil is dispersed in the mixture, where the boundary
layer is broken; the viscous effects do not present significant differences in the
concentration and velocity profiles.

Identiferoai:union.ndltd.org:IBICT/oai:localhost:riufcg/259
Date07 February 2018
CreatorsSOUSA, Raissa Menezes de.
ContributorsFARIAS NETO, Severino Rodrigues de., SILVA, Vimario Simoes., OLIVEIRA, Laercio Gomes de., LIMA, Lígia Maria Ribeiro.
PublisherUniversidade Federal de Campina Grande, PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA, UFCG, Brasil, Centro de Ciências e Tecnologia - CCT
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Sourcereponame:Biblioteca de Teses e Dissertações da UFCG, instname:Universidade Federal de Campina Grande, instacron:UFCG
Rightsinfo:eu-repo/semantics/openAccess
RelationCoordenação de Aperfeiçoamento de Pessoal de Nível Superior.

Page generated in 0.0031 seconds