A MEMS piezoresistive pressure sensor provides a low-cost and accurate means of detecting and quantifying small-scale disturbances in underwater environments. A highly sensitive MEMS pressure sensor has been developed that can be packaged in two different ways – one in a cylindrical housing, and the other in a flexible, yet robust, strip configuration – enabling more freedom for the user to choose an option that fits their needs. The sensing element of each consists of four piezoresistive elements in a Wheatstone Bridge configuration arranged on a deformable buried-oxide layer, which is then bonded to a Silicon base layer with a hollow cavity carved using reactive-ion etching. Previous work has shown the survivability of these sensors in an underwater environment and also measurements of low frequency pressure changes due to flow and varying turbulence intensities. The present work is focused on evaluating these pressure sensors and testing the limits of the sensing element in the low, medium, and high frequency regime (<100Hz to >1kHz) to gain further insight into the performance.
Five experimental tests were developed and conducted to guide this research objective. The sensor responses under different flow conditions were measured and analyzed with selected filtering and resampling techniques to eliminate background noises. First, the sensors were calibrated to ensure their linearity and to determine their pressure sensitivities. Then, using bench-top testing rigs and a water tunnel, the sensor performance was evaluated in submerged environments when subjected to multiple small-scale flow disturbances across the tested frequency regime.
It was found that the present sensors are capable of providing more accurate measurements across a tested frequency regime of 0 to 20,000Hz when compared to other off-the-shelf products. Testing in submerged environment showed that the sensors are capable of detecting small-scale pressure fluctuations as a result of eddies which are evident in a Von Karman vortex street and a turbulent flow. Despite the presence of EMI noise within a water tunnel, the sensors demonstrated a decay of pressure fluctuations that is consistent with previous research in the field. Overall, the present work increases understanding of the sensors' performances across a broad range of frequencies and provides insight into potential uses and future work. / Master of Science / Pressure sensors are an important, if not the most important, measurement device available today. Pressure sensors play an integral role in the everyday lives for everyone around the world; from applications in medicine, aerospace, autonomy and computation, these sensors provide real-time feedback and help gain a deeper understanding of a system. However, with the technological advances in the Modern Age, there has been a growing need for smaller, cheaper, and faster sensors. As a result, engineers continued to improve sensor performance in the past century with new technologies. A micro-electromechanical system (MEMS) pressure sensor offers a low-cost and energy efficient method to quantify pressure fluctuations within a system.
This work focuses on evaluating the performance of three MEMS pressure sensors for use in a submerged environment to detect small-scale pressure fluctuations across a broad range of frequencies. Five different tests were conducted to investigate this research objective. The first three were performed in a controlled underwater environment from which direct conclusions could be made. The last two were performed in an uncontrolled underwater environment from which comparisons to literature and known phenomena were used to draw conclusions. A key result showed that the sensor measurements aligned with prior research in the field. Multiple data reduction techniques were also used during post-processing to ensure accurate data was being collected.
The studies showed that the developed MEMS pressure sensors provided the same capabilities as other commercially available pressure measurement devices, all the while displaying a higher sensitivity and broader frequency range. Furthermore, the survivability and robustness of the sensor was proven when subjected to large- and small-scale flow disturbances in a water tunnel.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/115676 |
| Date | 06 July 2023 |
| Creators | Talaksi, Omar |
| Contributors | Aerospace and Ocean Engineering, Ng, Wing Fai, Borgoltz, Aurelien, Coutier-Delgosha, Olivier |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.2341 seconds