Return to search

Systém chránění s využitím výstupu z elektronického senzorického systému měření proudu a napětí / The Protection System Working on Output of Electronic Sensor System Measuring Current and Voltage

At present, there is a widespread use of alternative measurement technologies in electrical networks that include current and voltage sensors. Their use is closely related to the use of IEC 61850-9-2 for data transfer of measured values within the substation for the purpose of protection and measurement. The use of sensors and communication standard IEC 61850 together with high-speed Ethernet will simplify the concept of the arrangement of protection terminals in substations and enable the development of a new protection system based on central protection. The dissertation is focused on protection algorithms, which use the SV according to IEC 61850-9-2, and their implementation into the central protection model. Thesis describes development in the field of protection of substations and the currently available solutions using IEC 61850-9-2 and the principle of central protection. Thesis explains algorithms for selected protection functions - overcurrent protection, negative sequence overcurrent protection, logic busbar protection and differential protection. Further, thesis deals with the programming of protection function algorithms in LabView development environment in the form of a central protection model. The model processes data from a process bus according to IEC 61850-9-2 and sends a GOOSE message over Ethernet in the event of a failure. To verify the correct function of the programmed protection algorithms, a testing procedure was developed using OMICRON 256plus, the current sensor and the merging unit. The results of the testing of the central protection model and the proposed algorithms were compared with the results of testing the currently used protections. At the end, the thesis deals with the assessment of the benefits of central protection for protecting substations and the possibility of further utilization of the central protection model. The thesis highlights a new way of protecting the electrification system using digital data from MU transferred via the process bus described in IEC 61850-9-2.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:363725
Date January 2017
CreatorsBajánek, Tomáš
ContributorsJiřičková,, Jana, Janíček, František, Orságová, Jaroslava
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0014 seconds