Waste water from the mining industry is generally extremely complex and contains numerous species which influence the adsorption of the metals to any biomass. A variety of factors need to be addressed before treatment is considered viable. It is also beneficial to establish the binding characteristics of the metal of interest to maximise its interaction with the biomass to be utilised. Azalia filiculaides was investigated in the adsorption of gold(III), lead(II), iron(ID), copper(II) and platinum (IV). In batch studies, the optimum biomass and initial gold(III) concentrations were found to be 5 gIL and 8 mgIL respectively. The adsorption of gold(ID) is principally pH-dependent with optimal removal at pH 2. Lead(II), iron(III) and copper(II) did not compete with gold(III) adsorption under equimolar and simulated effluent conditions. Halides, with increasing affinity for gold (chloride < bromide < iodide), can affect gold uptake with the soft base, iodide, exhibiting the most inhibition (25%) and the hard base, chloride, O%. Mercaptoethanol (soft base) showed no interference in gold(III) adsorption while the presence of sulphate (hard base) and sulphite (borderline base) showed that concentrations in excess of 1 0 mM may adversely affect gold(ill) uptake, most likely due to competition for cationic sites on the biomass. Column studies, better suited to high volume treatment, indicated that a flow-rate of 5 mL/min and an initial gold(ill) concentration of 5 mgIL was optimal. Competitive effects between lead, iron, copper and gold again showed little or no interference. The halides, chloride, bromide and iodide, affect gold(ill) uptake similarly to the batch studies, while the bases mercaptoethanol and sulphate minimally affect gold(III) binding with sulphite severely hampering adsorption (70% inhibition). To optimise gold desorption, preliminary batch studies indicated that a ratio of 1:1 of adsorbentdesorbent was optimal, whilst gas purging of thiourea with oxygen, air and nitrogen decreased gold elution in proportion to decreased amounts of oxygen. A series of desorbents were utilised, in column studies, to optimise and determine the speciation of bound gold. The presence of an oxidant with thiourea enhanced desorption greater than 3 fold when compared with thiourea alone. Thiourea desorption studies, aided by the oxidant, suggest that gold is present in the + I and 0 oxidation states. Ultimately thiourea, perchloric acid and hydrochloric acid was found to be the most optimal elutant for gold (J 00% recovery). For selective metal recovery oflead and copper, pre-washing the plant material with water, utilising an acid (0.3 M nitric acid), pumping in an up-flow mode, and recycling the desorbent six times was found to be optimal elutant for gold (J 00% recovery). Cost analysis of utilising elutant versus incinerating the biomass for gold recovery indicated the latter as the most economical. Over a 5 cycle adsorption and desorption series, acid desorption before each adsorption cycle was found to result in greater than 92% desorption for lead and 96% for copper. Gold recovery was 97% with incineration. A preliminary study with gold effluent (Mine C) indicated that nickel and sulphate was removed in batch and column studies. Gold removal was found to be 100% and 4% in batch and column studies respectively. Adsorption of gold in the effluent study was accompanied by the release ofHt. Modifying the plant material with various reagents failed to identify the primary binding sites and the role of polysaccharides, proteins and lipids in gold(ill) uptake. The mode of gold binding is suggested as being initially ionic, this is very rapid, with the interaction of the anionic complex, [AuCI₄]". with the cationic biomass (PH 2). This eventually leads to the displacement of the chloride ligand(s) initiating covalent binding. Spectral studies of the chemical interaction between gold and the representative tannins indicated the protonated hydroxy groups to be responsible. All evidence suggests that the binding mechanisms of gold are not simple. Preliminary adsorption studies of platinum by Azalia filiculaides were conducted. Batch studies indicated that J gIL biomass concentration, initial platinum concentration of 20 mgIL and pH 2 are optimal, while the column studies indicated a flow-rate of! 0 rnL/min and initial platinum concentration of 20 mgIL as optimal. In the platinum effluent study, platinum showed a removal of 23 % and 2 J % for the batch and column studies respectively. Again adsorption was accompanied by //' release. Azalia filiculaides demonstrated its feasibility in the removal of gold and platinum from simulated as well as waste water solutions. Its potential viability as a biosorbent was demonstrated by the high recovery from synthetic solutions of greater than 99% for gold (2-10 mgIL), and greater than 89% for platinum (20 mgIL).
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:rhodes/vital:3894 |
| Date | January 2002 |
| Creators | Antunes, Ana Paula Martins |
| Publisher | Rhodes University, Faculty of Science, Biochemistry, Microbiology and Biotechnology |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Doctoral, PhD |
| Format | 217 leaves, pdf |
| Rights | Antunes, Ana Paula Martins |
Page generated in 0.0015 seconds