This paper describes an investigation carried out to study the fatigue failures of a "keyed tapered-shaft assembly" as affected by the keyway. Two fatigue testing machines were built and used: one tested a keyed assembly in reversed bending, and the other tested a keyed assembly in reversed torsion or a combination of reversed bending and reversed torsion. Both sled-runner and round-ended keyways were tested and the failures were compared with a view to establishing a law of failure. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/41232 |
| Date | January 1949 |
| Creators | Leith, Willliam Cumming |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0024 seconds