Return to search

Análise estrutural de um ferramentador pelo método dos elementos finitos /

Orientador: Edson A. Capello Sousa / Banca: Paulo Cezar Razuk / Banca: Marcio Antonio Bazani / Resumo: Objetivou-se analisar estruturalmente um fermentador de 32 [m] de altura com colunas metálicas de sustentação, submetido ao carregamento de vento estático segundo o procedimento descrito pela norma NBR 6123 (1988), pressão hidrostática e pressão interna dos gases. Duas situações distintas foram consideradas para um melhor entendimento da análise: a primeira, sendo o fermentador vazio submetido aos esforços de vento; a segunda, o fermentador em operação submetido ao carregamento hidrostático e a pressão interna dos gases. Para se obter as tensões nos itens que compõem o fermentador (teto, costado, viga de transição, colunas e fundo cônico) e reações nas bases, foi utilizado o Método dos Elementos Finitos ou MEF. Para isso, foi elaborado um modelo geométrico bem próximo ao real, com os detalhes de chapas internas e externas. Determinou-se a espessura das chapas do costado pela norma NBR 7821 (1983) e verificou-se tensões, e possíveis pontos de falha já ocorridos no setor sucroalcooleiro. Apresenta-se também três problemas analisados pelo MEF que confrontados com os resultados analíticos, permitiu a constatação da validade dos resultados obtidos numericamente o ganho de confiança no uso da ferramenta. O MEF é uma ferramenta auxiliar em casos em que não é possível a utilização de cálculos tradidionais (analíticos) / Abstract: The objective was to structurally analyze a 32 meter height Fermenter, with columns, submitted to static wind load according to the procedure described by the NBR 6123 (1988) norm, hydrostatic pressure and internal pressure of the gases. Two different situations have been considered for a better analyze comprehension: the first one with the empty Fermenter submitted to wind efforts; the second with the operating fermenter submitted to the hydrostatic load and the internal pressure of the gases. In order to obtain the stresses on the items that make up the fermenter (heads, shell, beam transition, columns and conic bottom) and bases reactions the Finite Element Method or FEM has been used. For this we have developed a geometric model very close to reality, with the details of internal and external plates. It was determined by the thickness of the side shell plating by the NBR 7821 (1983) and there were tensions, and possible points of failure that have already occurred in the alcohol sector. It was also presented three issues addressed by comparing FEM with analytical results, which allowed the verification of the validity of the results obtained numerically and gain of confidence in using the tool. The MEF is an auxiliary tool in cases where it is not possible to use traditional calculations (analytical) / Mestre

Identiferoai:union.ndltd.org:UNESP/oai:www.athena.biblioteca.unesp.br:UEP01-000633472
Date January 2010
CreatorsMartins Filho, Paulo Cezar.
ContributorsUniversidade Estadual Paulista "Júlio de Mesquita Filho" Faculdade de Engenharia (Campus de Bauru).
PublisherBauru : [s.n.],
Source SetsUniversidade Estadual Paulista
LanguagePortuguese
Detected LanguagePortuguese
Typetext
Format90 f. :
RelationSistema requerido: Adobe Acrobat Reader

Page generated in 0.0026 seconds