With the demand of computing power from electronic chips on a constant rise, innovative methods are needed for effective and efficient thermal management. Forced convection cooling through an array of micro pin-fins acts not only as a heat sink, but also allows for the electrical interconnection between stacked layers of integrated circuits. This work performs a multi-objective optimization of three shapes of pin-fins to maximize the efficiency of this cooling system. An inverse design approach that allows for the design of cooling configurations without prior knowledge of thermal mapping was proposed and validated. The optimization study showed that pin-fin configurations are capable of containing heat flux levels of next generation electronic chips. It was also shown that even under these high heat fluxes the structural integrity is not compromised. The inverse approach showed that configurations exist that are capable of cooling heat fluxes beyond those of next generation chips. Thin film heat spreaders made of diamond and graphene nano-platelets were also investigated and showed that further reduction in maximum temperature, increase in temperature uniformity and reduction in thermal stresses are possible.
| Identifer | oai:union.ndltd.org:fiu.edu/oai:digitalcommons.fiu.edu:etd-3220 |
| Date | 12 June 2015 |
| Creators | Reddy, Sohail R. |
| Publisher | FIU Digital Commons |
| Source Sets | Florida International University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | FIU Electronic Theses and Dissertations |
Page generated in 0.0023 seconds