Return to search

Electroosmotic Flows in a Square Microchannel

Experiments were performed using a microparticle image velocimetry (MPIV) for full field velocity distributions of electroosmotically driven flows in a 40 mm long microchannel with a square cross section of 200 µm ¡Ñ 200 µm. Electroosmotic flow bulk fluid velocity measurements were made in a range of streamwise electric field strengths from 5 to 25 kV/m. A series of seed particle calibration tests can be made in a 200 µm x 200 µm x 24000 µm untreated PDMS channel incorporating MPIV to determine the electrophoretic mobilities in aqueous buffer solutions of 1 TAE, 1 TBE, 10 mM NaCl, and 10 mM borate, respectively. A linear/nonlinear (due to Joule heating) flow rate increase with applied field was obtained and compared with those of previous studies. A parametric study, with extensive measurements was performed with different electric field strength and buffer solution concentration under a constant zeta potential at wall for each buffer. The characteristics of electroosmotic flow in square microchannels were thus investigated. Finally, a composite correlation of the relevant parameters was developed within accuracy for 99% of the experimental data.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0714105-084613
Date14 July 2005
CreatorsLin, Hung-chun
ContributorsShou-Shing Hsieh, C. J. Ho, Chin-Chia Su
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0714105-084613
Rightsoff_campus_withheld, Copyright information available at source archive

Page generated in 0.0021 seconds