Microfluidic based miniature lab-on-a-chip devices integrate different laboratory functionality in microscale. Microarray technology is evolving as a powerful tool for biomedical and pharmaceutical applications to identify gene sequences or to determine gene expression levels. Preparation of samples and spotting the arrays are the two major steps required for making microarrays. The microfluidic components developed in this research would facilitate performing the above-mentioned steps by a single lab-on-a-chip. Three microfluidic modules were developed: a non-contact microdispenser, an interface connecting the microdispenser with planar Electrowetting on Dielectric (EWOD) sample manipulator and a microvalve that controls the flow at the interface. An electrostatically actuated non-contact type drop-on-demand based microdispenser was developed. The dispenser was designed using finite element modeling technique that solved electrostatically actuated dispensing process. Prototypes were fabricated and tested verifying stable droplet dispensing with error in subsequent droplet generation was less than 15% between each droplet. The frequency of stable generation was 20 Hz and the average volume of dispensed droplet was 1 nL. A closed-channel EWOD actuated interface was developed that allowed a series of droplets to merge inside at the interface converting droplet flow to a continuous flow. An innovative design modification allowed series of droplet merging inside closed-channel. The interface allows integration of pressure driven devices such as: pumps, dispensers, and valves with droplet based planar EWOD devices. A novel EWOD based microvalve was developed that utilizes a thermo-responsive polymer to block and unblock a pressurized continuous flow. EWOD actuation was used to control the positioning of the valving polymer at location of interest. The valve also isolated a pressurized flow from an integrated planar EWOD device. Valves with zero leak rates were demonstrated. Such a valve will be useful in controlling microflows in EWOD to pressure driven flows such as dispensers.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/43369 |
| Date | 11 December 2013 |
| Creators | Ahamed, Mohammed Jalal |
| Contributors | Ben Mrad, Ridha, Sullivan, Pierre E. |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0023 seconds