Recent advances in microelectronics and packaging industry are characterized by a progressive miniaturization in response to a general trend toward higher integration and package density. Corresponding to this are the challenges to traditional manufacturing processes. Some of these challenges can be satisfied by laser micromachining, because of its inherent advantages. In laser micromachining, there is no tool wear, the heat affected zone can be localized into a very small area, and the laser micromachining systems can be operated at a very wide range of speeds. Some applications of laser micromachining include pulsed Nd:YAG laser spot welding for the photonic devices and laser microdrilling in the computer printed circuit board market. Although laser micromachining has become widely used in microelectronics and packaging industry, it still produces results having a variability in properties and quality due to very complex phenomena involved in the process, including, but not limited to, heat transfer, fluid flow, plasma effects, and metallurgical problems. Therefore, in order to utilize the advantages of laser micromachining and to achieve anticipated results, it is necessary to develop a thorough understanding of the involved physical processes, especially those relating to microelectronics and packaging applications. The objective of this Dissertation was to study laser micromachining processes, especially laser drilling and welding of metals or their alloys, for the microscale applications. The investigations performed in this Dissertation were based on analytical, computational, and experimental solutions (ACES) methodology. More specifically, the studies were focused on development of a consistent set of equations representing interaction of the laser beam with materials of interest in this Dissertation, solution of these equations by finite difference method (FDM) and finite element method (FEM), experimental demonstration of laser micromachining, and correlation of the results. The contributions of this Dissertation include: 1)development of a finite difference method (FDM) program with color graphic interface, which has the capability of adjusting the laser power distributions, coefficient of energy absorption, and nonlinear material properties of the workpiece as functions of temperature, and can be extended to calculate the fluid dynamic phenomena and the profiles of laser micromachined workpieces, 2)detailed investigations of the effect of laser operating parameters on the results of the profiles and dimensions of the laser microdrilled or microwelded workpiece, which provide the guideline and advance currently existing laser micromachining processes, 3)use, for the first time, of a novel optoelectronic holography (OEH) system, which provides non-contact full-field deformation measurements with sub-micrometer accuracy, for quantitative characterization of thermal deformations of the laser micromachined parts, 4)experimental evaluations of strength of laser microwelds as the function of laser power levels and number of microwelds, which showed the lower values than the strength of the base material due to the increase of hardness at the heat affected zone (HAZ) of the microwelds, 5)measurements of temperature profiles during laser microwelding, which showed good correlations with computational results, 6)detailed considerations of absorption of laser beam energy, effect of thermal and aerodynamic conditions due to shielding gas, and the formation of plasma and its effect on laser micromachining processes. The investigations presented in this Dissertation show viability of the laser micromachining processes, account for the considerations required for a better understanding of laser micromachining processes, and provide guideline which can help explaining and advancing the currently existing laser micromachining processes. Results of this Dissertation will facilitate improvements and optimizations of the state-of-the-art laser micromachining techniques and enable the emerging technologies related to the multi-disciplinary field of microelectronics and packaging for the future.
| Identifer | oai:union.ndltd.org:wpi.edu/oai:digitalcommons.wpi.edu:etd-dissertations-1285 |
| Date | 13 May 2004 |
| Creators | Han, Wei |
| Contributors | Yiming (Kevin) Rong, Committee Member, Gretar Tryggvason, Department Head, John M. Sullivan, Jr., Committee Member, Thomas F. Marinis, Committee Member, Ryszard J. Pryputniewicz, Advisor, Cosme Furlong, Committee Member |
| Publisher | Digital WPI |
| Source Sets | Worcester Polytechnic Institute |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Doctoral Dissertations (All Dissertations, All Years) |
Page generated in 0.0025 seconds