This master thesis is focused on design and construction of laboratory shot peening machine. This machine is determined for modification of the topography of the friction surfaces specimens. Two types of specimens are used. The first specimen is sphere with diameter 20-40 mm. The second specimen is cylinder with 9.6 mm diameter. In this thesis the setting parameters of shot peening for creation of surface with the micro-texture was described. Influence of the micro-texture to the coefficient of friction was investigated under mixed lubrication and slip condition.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230576 |
| Date | January 2013 |
| Creators | Kománek, Jiří |
| Contributors | Hutař, Pavel, Vrbka, Martin |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds