The project, developed under the terms of engineering studies of the M-STG Manufacturing Technology branch, presents the analytical assessment of the cutting surface of the metal sheet by two most commonly used modern technologies of cutting, which is the laser beam division and the exact cutting. The evaluation of this area was mainly focused on the level of the penetration of the zinc surface layer in the area of the given cutting. With the help of modern methods of electron microscopy, these values of penetration were then estabilished for each technology. The analysis itself was preceded by literary studies of all individual parts participating in this experiment.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231072 |
Date | January 2014 |
Creators | Klazar, Martin |
Contributors | Žák, Ladislav, Mrňa, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds