In this work phase transformations in metastable β (primarily Ti-15Mo) alloys were studied utilizing electrical resistance, dilatometry, transmission electron microscopy and X-ray and neutron diffraction. The materials Ti-15Mo, Ti-6.8Mo-4.5Fe-1.5Al (LCB), Ti-5Al-5V-5Mo-3Cr (Ti-5553), Ti-29Nb-1Fe-0.5Si (TNFS), Ti-15Mo-3Nb-3Al-0.2Si (Timetal 21S) and Ti-13Cr-1Fe-3Al (TCFA) (in wt. %) - were subjected to a solution treatment at a temperature above β transus and quenched into water. In this condition, the microstructure of the investigated materials consists of β matrix and ω particles. Samples quenched from important temperatures determined from in-situ electrical resistance and dilatometry measurements were studied by post-mortem TEM. In-situ X-ray and neutron diffraction provided direct observations of microstructure of Ti-15Mo alloy during linear heating and confirmed statements based on results of indirect methods, such as: the decrease of volume fraction of ω phase during heating at low temperatures (up to 250 ◦ C), complete dissolution of ω phase at 560 ◦ C and precipitation of α phase without ω particles serving as its direct precursors. X-ray diffraction experiment allowed to determine relative evolution of the size of ω particles while phase fraction evolution was derived from neutron diffraction. The...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:389834 |
| Date | January 2018 |
| Creators | Zháňal, Pavel |
| Contributors | Harcuba, Petr, Kalvoda, Ladislav, Strunz, Pavel |
| Source Sets | Czech ETDs |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0027 seconds