Return to search

An integrated approach to optimise energy consumption of mine compressed air systems / Johannes Hendry Marais

The demand for electricity in South Africa has grown faster than the increase in generation
capacity. However, it is expensive and time consuming to commission new power stations.
Another approach is to reduce electricity demand through the implementation of energy
efficiency projects. This alternative is usually less expensive.
Compressed air on South African mines is a large electricity consumer with a reputation of
wastage. This allows significant potential for electrical and financial savings. A typical
mine compressed air system consists of multiple compressors at various locations, surface
connection networks, underground distribution systems, thousands of users and leaks.
The size, complexity and age of these systems provide a major challenge for electricity
saving efforts. Simulating such an intricate system is difficult as it is nearly impossible to
accurately gather all the required system parameters.
Some initiatives focused on subsections of mine compressed air systems. This is not the
best approach as changes to one subsection may adversely affect other systems. A new
approach to simplify mine compressed air systems was developed to identify saving
opportunities and to assess the true impact of saving efforts. This new approach enables
easier system analysis than complex simulation models. Techniques to gather critical
system information are also provided.
A new implementation procedure was also developed to integrate different energy saving
strategies for maximum savings. An electrical power saving of 109 MW was achieved
through the implementation of the integrated approach on twenty-two mine compressed air
systems. The savings is equivalent to a reduction of 0.96 TWh per annum that relates to a saving of
0.4% of South Africa’s total electricity consumption. Average compressor power
consumption was reduced by 30%. The power consumption reduction relates to an
estimated annual electricity cost saving of R315 million. A saving of 0.96 TWh per annum
is equivalent to a carbon dioxide emission reduction of 0.98 million tonne.
The implementation of the integrated approach could be applied to other industrial
compressed air systems. A reduction in electricity consumption of 30% on all industrial
compressed air systems has the potential to reduce global electricity demand by 267 TWh
per annum. That is more than the total amount of electricity consumed in South Africa. / Thesis (PhD (Electrical Engineering))--North-West University, Potchefstroom Campus, 2013

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nwu/oai:dspace.nwu.ac.za:10394/9519
Date January 2012
CreatorsMarais, Johannes Hendry
PublisherNorth-West University
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis

Page generated in 0.0014 seconds