The demand to integrate more features has significantly increased the complexity and power consumption of smart portable devices. Therefore extending the battery life-time has become a major challenge and new approaches are required to decrease the power consumed from the source. Traditionally the focus has been on reducing the dynamic power consumption of the digital circuits used in these devices. However as process technologies scale, reducing the dynamic power has become less effective due to the increased impact of the leakage power. Alternatively, a more effective approach to minimize the power consumption is to continuously optimize the ratio of the dynamic and leakage power while delivering the required performance.
This works presents a novel power-aware system for dynamic minimum power point tracking of digital loads in portable applications. The system integrates a dc-dc converter power-stage and the supplied digital circuit. The integrated dc-dc converter IC utilizes a mixed-signal current program mode (CPM) controller to regulate the supply voltage of the digital load IC. This embedded converter inherently measures the power consumption of the load in real-time, eliminating the need for additional power sensing circuitry. Based on the information available in the CPM controller, a minimum power point tracking (MiPPT) controller sets the supply and threshold voltages for the digital load to minimize its power consumption while maintaining a target frequency. The 10MHz mixed-signal CPM controlled dc-dc converter and the digital load are fabricated in 0.13µm IBM technology. Experimental results verify that the introduced system results in up to 30% lower power consumption from the battery source.
Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/35923 |
Date | 09 August 2013 |
Creators | Parayandeh, Amir |
Contributors | Prodic, Aleksandar |
Source Sets | University of Toronto |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 0.0019 seconds