A thesis on the study of the frequency response of a pneumatic system designed to provide pulsed flow for flow control applications is presented. The system consists of a high pressure air source, a high-frequency solenoid valve, a length of tube and a minor loss. The experiment mimics the pneumatic drive for our Coanda-Assisted Spray Manipulation actuator and applies to many flow control applications involving pulsed flow. Square wave signals of various frequency are fed to the solenoid valve. The flow at the exit of the system is measured with a single hot wire and compared to steady flow through the same geometry. The effect of the inlet pressure, tube length and the size of the minor loss is evaluated. These data are modeled using a Transmission Matrix Model. (60 pages)
| Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-2122 |
| Date | 01 December 2011 |
| Creators | West, Brian M. |
| Publisher | DigitalCommons@USU |
| Source Sets | Utah State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Graduate Theses and Dissertations |
| Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.002 seconds