This master’s thesis deals with determination of NVH parameters of the gearbox housing for electric vehicle. The introduction part is focused on the theoretical knowledge of this issue. Subsequently, the deviations of geometry on the gearbox were measure by 3D scan method. The next part of thesis is focused on the modal analysis, which is solved by numerical approach and followed by experimental verification. During the numerical calculation solving, the influence of the screw preloading on the modal properties of the structure, was also taken into account. Numerical harmonic analysis was then performed and the results were compared with the experimental approach. The conclusion is devoted to material damping and comparison of the individual results.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:433548 |
| Date | January 2020 |
| Creators | David, Jan |
| Contributors | Prokop, Aleš, Řehák, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.001 seconds