The aim of this diploma thesis is to determine and compare modal properties of four swirl turbine wheels, each with a different geometry. Natural frequencies and mode shapes were obtained based on computer modelling using Ansys software and they were compared with experimental modal analysis' results. The computer modelling and the experimental modal analysis were carried out for different boundary conditions and in different environments. The beginning of the thesis is dedicated to a brief overview of literature with similar issues. Then a brief introduction of a dynamics theory is mentioned in which equations of motion for a damped and an undamped single degree of freedom system are derived. The creation of a geometry model which is obtained by a reverse engineering is shown in the second part of the thesis. The geometry model was subsequently used for the computer based modelling of the modal parameters. In the third part an experimental equipment, setting, measurement and processing of data are described. The conclusion of the thesis is dedicated to the comparison of the results obtained by the experimental modal analysis and the computing modelling is presented. Moreover, influence of boundary conditions and influence of the environment on the natural frequencies are evaluated.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231288 |
| Date | January 2014 |
| Creators | Pekar, Marek |
| Contributors | Chromek, Lukáš, Lošák, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds