This thesis evaluated experimental research on the influence of selected factors (species, thickness, density, number of stress cycles) on the specified material characteristics (modulus of elasticity, modulus of rupture, limit of proportionality, bendability coefficient). The measured values were statistically evaluated and expressed in tables and graphs. Beech (Fagus Sylvatica L.) was selected to represent hardwood and aspen (Populus Tremula L.) softwood.
Tree species affects all observed characteristics. The results show that the modulus of elasticity increases with increasing densification of the material, but decreases with the increasing thickness of the material. A similar dependence is observed even with the modulus of rupture and limit of proportionality, which is also dependent on the number of cycles. The bendability coefficient is affected by material thickness.
It is expected that based on the evaluation of the results it will be possible to design materials with tailored properties.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:256876 |
| Date | January 2016 |
| Creators | Vokatý, Vojtěch |
| Contributors | Gaff, Milan, Babiak, Marian |
| Publisher | Česká zemědělská univerzita v Praze |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0121 seconds