Return to search

Chemistry and microbiology of green building materials

While the market for “green” building materials has been expanding rapidly, no
rigorous framework exists for evaluating the chemical and biological reactivity of these
building materials. The objective of this research was to assess the ozone reactivity,
primary and secondary VOC emission rates and mold resistance of selected green
building materials. Two different sets of experiments were conducted. The first set
focused on reactive consumption of ozone by ten common green materials. A screening
assessment of secondary emissions of C6 and greater carbonyls was also completed for
selected green materials. The second set was completed to evaluate the relative resistance
of selected green building materials and their conventional analogs to surface fungal
growth in moist interior environments.
Ozone reactivity varied considerably between test materials. The ozone deposition
velocity for inorganic ceiling tiles, for example, was two times higher than cabinetry
materials and approximately fifty times higher than UV-coated bamboo. Experimental
results were used as input to a simple mass balance model which predicted that the ratio
of indoor to outdoor ozone concentrations was not significantly affected by green
building materials. The green materials used in this study emitted less primary and
secondary VOCs than did their non-green counterparts, although the difference was not
significant and the material sample set was relatively small. Also, the green materials
tested were not prone to either less or more mold growth than their conventional
counterparts. Instead, materials composed of organic materials with high equilibrium
moisture contents (EMC) were more prone to mold growth than inorganic materials with
low EMC. Perlite-based (inorganic) ceiling tiles that consumed relatively large amounts
of ozone without corresponding by-product formation were also resistant to mold growth.
Such findings should facilitate the selection of future green building materials, both
explicitly and by defining a protocol for future testing of green materials. / text

Identiferoai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/6894
Date05 February 2010
CreatorsHoang, Chi Phuong
Source SetsUniversity of Texas
LanguageEnglish
Detected LanguageEnglish
Formatelectronic
RightsCopyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.

Page generated in 0.002 seconds