The topic of this thesis is divided in two main parts. The first is about the “tool/workpiece pair” method and the second is related to wear monitoring. The entire project will be about drilling and tapping operations done in SNECMA Vernon. In fact, the part is very expensive so they have to be closely controlled to avoid a maximum scrap pieces. Two software will be used to control it. Firstly, the “tool/workpiece pair” will be done through AMC3 (software developed at the ENSAM). And secondly the wear monitoring will be ensured by the software CTM Visu (developed by ARTIS). My task will be to learn how to use those software and then to implement them in the company.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231706 |
| Date | January 2014 |
| Creators | Fortunet, Charles |
| Contributors | Polzer, Aleš, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds