Return to search

Robot hand-arm co-operated motion planning

Research and development leading to the realisation of a fully autonomous and robust multi-fingered hand has been going on for three decades. Yet none can be found in an industrial application. This is largely because we do not fully understand the fundamental mechanics of multi-finger grasping. / This thesis is a study of the mechanics of multi-finger grasping, with particular attention being paid to applying the analysis to experimental co-operative motion tasks between a hand-arm system and grasped object. / Fine manipulation with multi-fingered robot hands is critically influenced by the capacity to achieve stable grasps. By exploring the fundamental mechanics involved, a method for establishing the stability of spatial four finger-contact grasps is obtained. This work examines both frictionless and frictional grasps in two and three dimensions and develops the stability requirements for grasping. The conditions for a stable grasp are expressed as simple equations relating the line coordinates of (i) transitory sliding actuator and (ii) the normal to the tangent plane at every contact location. This is achieved by using the principle of virtual work and a branch of statics known as astatics. / After specifying a grasp in terms of its contact locations and forces the object can be grasped. However, in general the configuration of the hand-arm combination will not be unique, as such a manipulator system has more than six degrees of freedom and is said to be super-abundant. The choice of appropriate shares taken by the arm and hand in delivering the manipulation task needs to be resolved. This can be done making use of a kinematic performance measure based on aligning the grip triangle with the hand line of symmetry and maximising the available manipulation range. The hand-arm combination can then be driven to this desired grasp enabling the manipulator to carry out the specified task effectively. A Salisbury hand and PUMA 760 robot arm are used to demonstrate these co-operative motion tasks. / All the experimental results are presented along with a detailed description of the implementation of a hierarchical robot controller system which incorporates force control of the PUMA 760.

Identiferoai:union.ndltd.org:ADTP/245617
Date January 1997
CreatorsLucas, S. R.
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsTerms and Conditions: Copyright in works deposited in the University of Melbourne Eprints Repository (UMER) is retained by the copyright owner. The work may not be altered without permission from the copyright owner. Readers may only, download, print, and save electronic copies of whole works for their own personal non-commercial use. Any use that exceeds these limits requires permission from the copyright owner. Attribution is essential when quoting or paraphrasing from these works., Open Access

Page generated in 0.0013 seconds