Return to search

A COP optimized control system for a CO₂ based automotive A/C-system

In the last few years carbon dioxide received increasing attention as a possible replacement for fluorocarbon-based refrigerants used within present automotive A/C system technology. R-134a is harmless to the ozone layer but the greenhouse effect is more than 1300 times higher than that of an equivalent amount of CO2. Alternative refrigerants are natural gasses such as propane and butane, however these gasses are considered explosive. With many objections raised it appears if CO2 will be the future refrigrant for automotive use. One concern with R-744 is its high operating pressure and suction/discharge pressure difference when compared to common refrigeration processes. A major problem with the CO2 cycle is the loss of effciency at high ambient temperatures. With a COP optimized control system for the expansion value based on pressure, temperature and mass flow of the refrigerant, an effective A/C system for CO2 could be deleloped. This resrach offers basic knowledge of refrigerant cycles and gives an overall view of the refrigerant change-over problem. With the results obtained from the experimental work a better understanding of the CO2 cycle and a better understanding towards effective A/C systems have been realized.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:9624
Date January 2007
CreatorsRapp, Tobias
PublisherNelson Mandela Metropolitan University, Faculty of Engineering, the Built Environment and Information Technology
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis, Masters, MTech
Formatxvi, 179 leaves, pdf
RightsNelson Mandela Metropolitan University

Page generated in 0.0021 seconds