This master thesis deals with stress-strain analysis of simplified model of the thin wall transformer case subjected to impact load of electrical blast. Electrical blast is replaced by chemical blast (detonation of high explosive). The problem is solved using computational modeling utilizing the Finite Element Method (FEM) and LS-DYNA solver. After the introduction where detonation and shock wave propagation is explained the analytical approach is presented. This approach serves to results verification. In the next chapter is conducted research of applicable methods from which ALE method is chosen. In preliminary study is performed the mesh size analysis that is focused on finding the size of element which is both computational effective and gives accurate results. Next the infulence of input conditions (shape, location and parametres of high explosive, location of detonation point, boundary conditions) on distribution and time progress of pressure is investigated. Then influence of the opening on upper side of the case on overall pressure redistribution and strain and stress of the case is analysed. The stress-strain analysis of the case´s door which are connected to case by various types of contact models is performed as well as stiffness analysis of these types of contact.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241688 |
| Date | January 2016 |
| Creators | Tatalák, Adam |
| Contributors | Peč, Michal, Návrat, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds