Return to search

Grippage des aciers inoxydables : influence de la nature des matériaux, de la microstructure et des traitements thermochimiques de surface / Galling in stainless steels : influence of materials nature, microstructure and thermochemical heat surface treatment

Le grippage dans le cas des aciers inoxydables est un phénomène complexe nécessitant une approche multi-échelle et multi-physique. Les 6 nuances d’aciers inoxydables sélectionnées au cours de cette thèse (316L, 316LN, Nitronic60, AISI660, Uranus45N et 17-4PH) ont été étudiées à l’état de réception et après traitements thermochimique de surface de type S3P. Ces matériaux ont subi un essai de grippage selon la norme ASTM G98 et les échantillons qui en résultent ont été caractérisés selon une approche d’abord surfacique (évolution de la morphologie de la surface, observations MEB…) puis en volume, notamment par le biais de l’approche originale de la microstructure (EBSD, DRX et MET notamment). Cette thèse a ainsi permis d’étudier les différents mécanismes intervenant lors du grippage des aciers inoxydables ainsi que d’étudier l’impact de différentes microstructures et composition chimiques sur ce phénomène. / Galling is a complex phenomenon requiring a multi-scale and multi-physical approach. During this thesis, 6 stainless steel grades (316L, 316LN, Nitronic60, AIS1660, Uranus45N et 17-4PH) are studied, both untreated and after S3P thermochemical heat surface treatment. These materials are tested according to ASTM G98 galling test and resulting samples are then characterized. This characterization is at first realized on the surface (surface morphology evolution, SEM investigations...), then on the bulk material, consisting mainly into a microstructural characterization based on EBSD, XRD and TEM investigations. It results from this thesis a better comprehension of the galling mechanisms in the case of stainless steel. The various effects of material composition, microstructure and material properties in general are also discussed.

Identiferoai:union.ndltd.org:theses.fr/2019COMP2486
Date23 May 2019
CreatorsLesage, Thibault
ContributorsCompiègne, Bouvier, Salima, Mazeran, Pierre-Emmanuel, Franz, Gérald
Source SetsDépôt national des thèses électroniques françaises
LanguageFrench
Detected LanguageFrench
TypeElectronic Thesis or Dissertation, Text

Page generated in 0.0056 seconds