In some dense urban environments (e.g., a street with tall buildings around), vehicle localization result provided by Global Positioning System (GPS) receiver might not be accurate or even unavailable due to signal reflection (multi-path) or poor satellite visibility. In order to improve the accuracy and robustness of assisted navigation systems so as to guarantee driving security and service continuity on road, a vehicle localization approach is presented in this thesis by taking use of the redundancy and complementarities of multiple sensors. At first, GPS localization method is complemented by onboard dead-reckoning (DR) method (inertial measurement unit, odometer, gyroscope), stereovision based visual odometry method, horizontal laser range finder (LRF) based scan alignment method, and a 2D GIS road network map based map-matching method to provide a coarse vehicle pose estimation. A sensor selection step is applied to validate the coherence of the observations from multiple sensors, only information provided by the validated sensors are combined under a loosely coupled probabilistic framework with an information filter. Then, if GPS receivers encounter long term outages, the accumulated localization error of DR-only method is proposed to be bounded by adding a GIS building map layer. Two onboard LRF systems (a horizontal LRF and a vertical LRF) are mounted on the roof of the vehicle and used to detect building facades in urban environment. The detected building facades are projected onto the 2D ground plane and associated with the GIS building map layer to correct the vehicle pose error, especially for the lateral error. The extracted facade landmarks from the vertical LRF scan are stored in a new GIS map layer. The proposed approach is tested and evaluated with real data sequences. Experimental results with real data show that fusion of the stereoscopic system and LRF can continue to localize the vehicle during GPS outages in short period and to correct the GPS positioning error such as GPS jumps; the road map can help to obtain an approximate estimation of the vehicle position by projecting the vehicle position on the corresponding road segment; and the integration of the building information can help to refine the initial pose estimation when GPS signals are lost for long time.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-01004660 |
| Date | 17 July 2013 |
| Creators | Wei, Lijun |
| Publisher | Université de Technologie de Belfort-Montbeliard |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0111 seconds