Return to search

Modelagem fenomenologica e simulação bidimensional da fluidodinamica de reatores de leito fluidizado circulante

Orientador: Milton Mori / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Quimica / Made available in DSpace on 2018-07-23T15:08:28Z (GMT). No. of bitstreams: 1
Alves_JoseJailsonNicacio_D.pdf: 8337754 bytes, checksum: 677214454b8c1e6f9d55d01e7142949e (MD5)
Previous issue date: 1998 / Resumo: Reatores de Leito Fluidizado Circulante são bastante utilizados na industria química e petroquímica, principalmente em processos de craqueamento catalítico e de combustão. A simulação numérica é ferramenta indispensável para o desenvolvimento e otimização destes reatores. Neste trabalho, um modelo fluidodinâmico baseado no modelo de dois fluidos, no qual o gás e as partículas são tratados como fases contínuas e totalmente interpenetrantes, foi utilizado na simulação da fluido dinâmica de reatores de leito fluidizado circulante. Analisa-se a sensibilidade do modelo fluido dinâmico com relação a parâmetros da teoria cinética do escoamento de materiais granulares. Analisa-se também o efeito do termo de transferência de energia cinética turbulenta entre as fases gasosa e particulada na fluidodinâmica. Utiliza-se o modelo de turbulência k-epislon para estimativa dos coeficientes de transporte da fase gasosa. Para a fase particulada, o modelo invíscido, o modelo newtoniano com viscosidade obtida experimentalmente (da literatura) e o modelo cinético do escoamento de materiais granulares (KTGF) foram utilizados e os resultados analisados. No modelo cinético do escoamento de materiais granulares os coeficientes de transporte dependem da temperatura granular, para a qual tem-se uma equação de conservação. A temperatura granular depende de parâmetros da teoria cinética do escoamento de materiais granulares e da sua condição de entrada. Os resultados comprovam que as partículas tendem a concentrarem-se nas regiões de menor temperatura granular e também mostram uma sensibilidade do modelo a estes parâmetros, mais fortemente aos coeficientes de restituição partícula-partícula e partícula-parede. Mostraram ainda que o termo de transferência de energia cinética do movimento flutuante é importante em sistemas com recirculações internas. O método dos volumes finitos com arranjo colocalizado foi utilizado na discretização do modelo. A solução foi obtida iterativamente resolvendo-se linha por linha com TDMA (Tri-Diagonal Matrix Algorithm). Com relação ao método numérico, mostra-se. que a interpolação do momentum e não da velocidade propriamente dita, para o cálculo das velocidades da fase particulada, nas faces do volume de controle, elimina as oscilações numéricas observadas para o caso de interpolação das velocidades no cálculo dos fluxos nas faces / Abstract: Circulating Fluidized Bed (CFB) reactors are used in a variety of industrial applications especially related to combustion and catalytic cracking. The fluid dynamic prediction of CFB is fundamental in its development and optimisation. In this work, a computer code for the simulation of the fluid dynamics of Circulating Fluidized Bed Reactors was developed. The Finite Volume Method was used to make the discretization of the mathematical model. The fluid dynamic model is based on the two fluid model, in which both the gas and particle phases are considered to be continuos and fully interpenetrating. With relation to mathematical model of CFB reactors, the sensitivity of the model to parameters of the Kinetic Theory of Granular Flows was analyzed. The effect of the turbulence transfer between the gas and particle phases was also analyzed. The k-Epsilon turbulence model, modified to consider the presence of the particle phase, was used to calculate the effective viscosity of the gas phase. Since there is no consensus about the effective stresses in the particle phases, the inviscid model, the Newtonian fluid model with experimentally obtained viscosity constant and the model of the emerging kinetic theory of granular flows (KTGF) have been used to simulate the fluid dynamics of the CFB reactors and the results were analysed. In the kinetic theory of granular flows the particle phase transport coefficients are dependent on the granular temperature, which intern has a transport equation. The granular temperature depends on parameters of the kinetic theory and also of the inlet conditions. The results confirm that the particles tends to concentrate in the regions of lower granular temperature, also showing a high sensitivity of the model to the parameters of the kinetic theory of granular flows, especially to the particle-particle and particle-wall coefficients of restitution. Further analyses showed that the interface turbulence transfer is very important for systems with high particle concentration and internal recirculations. With relation to the numerical method, in order to calculate the particle velocities at the faces of the control volumes, the results show that numerical oscillations are present when the calculation is carried out using linear interpolation of the particle phase velocities, in the collocated grid. The results also show that the numerical oscillation is eliminated by calculating the particle phase velocities at the faces of the control volumes by interpolating the particle phase momentum. The results were obtained by using a computer code developed by the authors. The finite volume method with the collocated grid, the hybrid interpolation scheme, the false time step strategy and the SIMPLE (Semi-Implicit Method for Pressure Linked Equations) algorithm were used to obtain the numerical solution / Doutorado / Desenvolvimento de Processos Químicos / Doutor em Engenharia Química

Identiferoai:union.ndltd.org:IBICT/oai:repositorio.unicamp.br:REPOSIP/267494
Date09 January 1998
CreatorsAlves, Jose Jailson Nicacio
ContributorsUNIVERSIDADE ESTADUAL DE CAMPINAS, Mori, Milton, 1947-, Fossy, Michel François, Cotta, Renato, Guirardello, Reginaldo, Maciel, Maria Regina Wolf
Publisher[s.n.], Universidade Estadual de Campinas. Faculdade de Engenharia Química, Programa de Pós-Graduação em Engenharia Química
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis
Format236f. : il., application/pdf
Sourcereponame:Repositório Institucional da Unicamp, instname:Universidade Estadual de Campinas, instacron:UNICAMP
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0028 seconds