This final thesis deals with a project documentation of a new multifunctional building. The building is located in Žďár nad Sázavou, in the Neumannova street. The building is divided into residential units and areas for a small company and a shop. The house is projected as a detached building with a partial basement and three floors. The residential part has 8 apartments in total – four apartments with three bedrooms, one with two bedrooms and three with one bedroom. It includes also cellars belonging to the apartments. The non-residential part includes space for a shop and an administrative part consisting of a reception, a meeting room, offices, stores and sanitary facilities. The main entrance in to the residential part is located on the level of staircase half landing. Main entrances into the non-residential parts are on the level of the ground floor. The house dispose with 24 parking places, two of them are dedicated for drivers with disabled parking permit. The building is based on concrete strip foundations. The external load-bearing structures are walled with clay masonry in the floors and with permanent formwork in the basement. The ceiling structure is formed with prestressed floor slabs. The house is covered with a warm flat roof. The staircase is pre-fabricated. In the thesis, there was put a stress on the appropriate dispositional, structural, technical and architectural design and on the safety in the use of the building. The drawing documentation is processed in the AutoCAD.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:371834 |
| Date | January 2018 |
| Creators | Blaha, Ondřej |
| Contributors | Janík, Zdeněk, Kalousek, Miloš |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds