This thesis deals with design of optimal parameters of a relative displacement sensor, working on the electrodynamics principle. The sensor is based on the voltage induction to the coil placed in changing magnetic field. Thesis is divided into three parts: introductory, theoretical and practical. The introductory part provides basic relationships between displacement, velocity and acceleration sensors. The theoretical part contains physical concepts and describes relationships necessary for calculations and creating a model of permanent magnet in COMSOL Multiphysics. In thesis further presents patent research of electrodynamic sensors. The practical part describes the creation of the permanent magnet model and the subsequent calculation of the induced voltage in the coil in Matlab. A description of laboratory measurements follows, presenting the final comparison of the simulation and measurement results. There were found some differences, which might have been caused by incorrect calculation of the induced voltage. The final part of the thesis presents general recommendations for the design of sensor, resulting from simulations and measurements.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:220125 |
| Date | January 2013 |
| Creators | Koutný, Petr |
| Contributors | Havránek, Zdeněk, Beneš, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds