The ease of manufacturing complex geometries using fused deposition modeling (FDM) 3D-Printing reduces the overall production cost compared with the traditional manufacturing techniques. Because of the benefits of 3D printing technologies, it is proposed to be used in the manufacturing of different products. But there is still no definite characterization of the surface quality of objects manufactured by 3D printing. Hence in order to define the texture of the surfaces produced, measurements from different samples are taken and quantified.In this study, a 3D test model consisting of various slopes is printed at different layer thicknesses and different print speeds using different 3D printers.Thus, the effect of the surface orientation on the surface roughness was studied in relation to the different layer thicknesses and different print speeds. The study samples are measured using the state of the art equipment at Halmstad University.This thesis studies the surface roughness at different slopes of FDM models.A related study on the dimensional variation between the CAD model and the actual3D printed model, and causes/reasons for the variations are analyzed.It is observed that FDM produced part surface topography is directly affected by the orientation of the surface. Also, the surface roughness increases with increase in layer thickness. The observed correlations between surface roughness and layer thickness and surface orientation could be used to better understand the behavior of FDM surfaces, thus to better quantify the surface roughness. To improve quality, it must first be quantified. It is well observed that dimensional inaccuracy exists between the CAD model and the printed part. These results suggest that there is a lot of work and improvements to be done in order to close the gap of dimensional inaccuracy and achieve a high precision commercial FDM 3Dprinting.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hh-35191 |
| Date | January 2017 |
| Creators | Berrimi, Chihab Eddine, Chaparala, Anish |
| Publisher | Högskolan i Halmstad, Rydberglaboratoriet för tillämpad naturvetenskap (RLAS), Högskolan i Halmstad, Rydberglaboratoriet för tillämpad naturvetenskap (RLAS) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0021 seconds