A software program was written that implements a finite element analysis (FEA) solution as the basis of an optimization function used for guiding the inverse design problem of aligning fibres, minimizing displacements in a fibre-reinforced polymer composite part in response to a given loading condition, for various part geometries.
The FEA solution makes use of the superlinear RGNTet4 element, which includes 3 displacement and 3 rotational degrees of freedom at 4 nodes. Convergence testing verified the accuracy of the solver versus symbolic results for simple cases.
Multivariate optimization over fibre orientations and volume fractions was carried out for a simple test case using the NLOpt nonlinear optimization library. Both derivative-free and gradient-based algorithms were tested. Low-Storage Broyden-Fletcher-Goldfarb-Shannon was the most effective algorithm.
Four more complex cases were examined, and by varying fibre orientations, reductions of 48%, 66%, 58% and 32% were achieved in displacements at the loaded nodes.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OOU.#10393/26122 |
Date | 16 September 2013 |
Creators | Gadoury, Pascal |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | English |
Type | Thèse / Thesis |
Page generated in 0.0015 seconds