Return to search

Design of a new synthetic nanocatalyst resulting high fuel quality based on multiple supports: experimental investigation and modeling

Yes / In order to meet the environmental legislations related to sulfur content, it is important to find an alternative techniques for deep removal of sulfur components from fuels. So, in this study, a novel nano-catalyst based on iron oxide (Fe2O3) as active component prepared over composite support (γ-Alumina + HY-zeolite) is developed here for efficient removal of sulfur compounds from fuel via oxidation process. The precipitation method is employed first to prepare the composite support and then the impregnation method is utilized to generate a novel synthetic homemade (Fe2O3/ composite support) nanocatalysts that has not been developed in the literature (iron oxide over composite support). The characterizations of the prepared catalysts display that the surface area of the catalyst increases with increasing the amount of Y-zeolite in composite support. The effectiveness of the catalysts is tested by utilizing oxidative desulfurization (ODS) operation under several operating conditions. The results of the experimental work show that the activity of oxidative desulfurization enhances with increasing Y-zeolite, temperature, and batch time under moderate operating conditions. The oxidative desulfurization efficiency followed the order: CAT-1 < CAT-2 < CAT-3. The CAT-3 performed the high removal of sulfur compounds (90.73%) at 100 min and 423 K. The best values of the kinetic parameters of the ODS process are then determined based on experimental data and model based techniques within gPROMS package. Finally, the reactor model is used to determine the optimal operating conditions while maximizing the removal of sulfur compounds leading to cleaner fuel. Where, 99.3% of the sulfur removal has achieved at batch time of 190.6 min, temperature of 543.56 K and initial sulfur content at 0.8668 wt% in the presence of CAT-3 based on the optimal kinetic parameters (order of reaction (n) of 1.9865719, activation energy (EA) at 29.942 KJ/mol and pre-exponential factor (ko) with 622.926 wt-0.9865719. min-1).

Identiferoai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/18857
Date06 April 2022
CreatorsJarullah, A.T., Ahmed, M.A., Al-Tabbakh, B.A., Mujtaba, Iqbal M.
Source SetsBradford Scholars
LanguageEnglish
Detected LanguageEnglish
TypeArticle, Published version
Rights(c) 2022 de Gruyter. Full-text reproduced in accordance with the publisher's self-archiving policy., Unspecified

Page generated in 0.0023 seconds