Return to search

Cellulose Nano Fibers Infused Polylactic Acid Using the Process of Twin Screw Melt Extrusion for 3d Printing Applications

Indianapolis / In this thesis, cellulose nanofiber (CNF) reinforced polylactic acid (PLA) filaments were produced for 3D printing applications using melt extrusion. The use of CNF reinforcement has the potential to improve the mechanical properties of PLA, making it a more suitable material for various 3D printing applications. To produce the nanocomposites, a master batch with a high concentration of CNFs was premixed with PLA, and then diluted to final concentrations of 1, 3, and 5 wt% during the extrusion process. The dilution was carried out to assess the effects of varying CNF concentrations on the morphology and mechanical properties of the composites. The results showed that the addition of 3 wt.% CNF significantly enhanced the mechanical properties of the PLA composites. Specifically, the tensile strength increased by 77.7%, the compressive strength increased by 62.7%, and the flexural strength increased by 60.2%. These findings demonstrate that the melt extrusion of CNF reinforced PLA filaments is a viable approach for producing nanocomposites with improved mechanical properties for 3D printing applications. In conclusion, the study highlights the potential of CNF reinforcement in improving the mechanical properties of PLA for 3D printing applications. The results can provide valuable information for researchers and industries in the field of 3D printing and materials science, as well as support the development of more advanced and sustainable 3D printing materials.

Identiferoai:union.ndltd.org:IUPUI/oai:scholarworks.iupui.edu:1805/33373
Date05 1900
CreatorsBhaganagar, Siddharth
ContributorsDalir, Hamid, Agarwal, Mangilal, Zhang, Jing
Source SetsIndiana University-Purdue University Indianapolis
Languageen_US
Detected LanguageEnglish

Page generated in 0.0018 seconds