This thesis focuses on improved processing methods for enhanced mechanical properties in polymer nanocomposites, and controlled drug release in polymer based delivery systems. Supercritical carbon dioxide assisted mixing was successfully used in preparation of polypropylene/sepiolite and polypropylene/multiwall carbon nanotube nanocomposites. Relatively homogeneous dispersed and well separated nanofillers were obtained throughout the PP matrix. A better preservation of nanofiller lengths was observed in the scCO 2 assisted mixing. Mechanical property studies showed a marked increase in Young's modulus and tensile strength with the addition of nanofillers. More interestingly, techniques usually designed to achieve high quality PP nanocomposites, such as the use of masterbatches, maleic anhydride grafted polypropylene compatibilizers or polymer coated MWNTs are not needed to achieve equivalent mechanical properties with scCO2 assisted mixing. ScCO2 was also used as a foaming technique to modify the traditional cured poly(ethyl methacrylate/tetrahydrofurfuryl methacrylate) system for a controlled release of chlorhexidine. Highly porous structures were produced and chlorhexidine released from scCO2 foamed samples was more than 3 times higher than traditionally cured samples. By altering the processing conditions, such as CO2 saturation time and depressurization time the CX release rate was altered. Finally, the electrospinning method was combined with the layering encapsulation technique in order to enable the incorporation of water-soluble drugs in poly(lactic-co-glycolic acid) fibres for biomedical applications. Water-soluble drug, Rhodamine 6G or protein bovine serum albumin, loaded calcium carbonate microparticles were successfully incorporated in PLGA fibres and a bead and string structured composite fibres.
Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:542016 |
Date | January 2011 |
Creators | Ma, Jia |
Publisher | Queen Mary, University of London |
Source Sets | Ethos UK |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Source | http://qmro.qmul.ac.uk/xmlui/handle/123456789/15048 |
Page generated in 0.1244 seconds