In an effort to present more ‘green’ material for massive manufacturing that are both competitive in their properties and can be more environmental friendly, natural fibers are being considered for possible applications in the automotive industry. This paper shows an exploratory study of the effects of pressure and layup on a hybrid composite of randomly oriented woven kenaf fibers and fiberglass/polyester sheet molding compound (SMC). In addition to initial testing performed on their water absorption and other important properties, these hybrid composites were tested to determine the bending modulus of elasticity (MOE) and the bending modulus of rupture (MOR) as well as the tensile modulus of elasticity (MOE), ultimate tensile strength. Pictures are taken from a Spectral Electron Microscope to determine if the fiber mats were properly penetrated by the resin and if the structural integrity of the fibers was maintained during manufacture.
| Identifer | oai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-5351 |
| Date | 06 August 2011 |
| Creators | Fulton, Ian Taylor |
| Publisher | Scholars Junction |
| Source Sets | Mississippi State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
Page generated in 0.0023 seconds