<p>Fuel cell propulsion systems fueled directly with hydrogen are being seriously
considered as a means of powering future light-duty vehicles. One of the greatest
impediments to the introduction of such vehicles is the perception that transitional
infrastructure to supply hydrogen will be an insurmountable obstacle. This transitional
infrastructure requirement might be met through the introduction of very small scale
refueling appliances which provide compressed hydrogen for either one vehicle or a small
fleet of vehicles. These small appliances must be efficient, non-polluting and low in cost.</p>
<p>
The report investigates the feasibility of one type of refueling appliance based upon
chemical reformation of natural gas in a steam reformation process. A natural gas steam
reformer employing a palladium-alloy membrane hydrogen separator operated at high
pressure and temperature (15+ bar and about 1200 K), should attain a net system efficiency
between 60% and 80% (LHV).</p>
<p>
Initial kinetic modeling of the reformer suggested that for mono-tubular reactor
geometries the reactor was heat transfer limited. Thus, parallel micro-tubular or plate-frame geometries might yield the highest space velocity. Critical issues which must be resolved
include required degree of hydrogen recycle for catalyst stability as well as the catalyst-specific
kinetics.
<p>
Reforming of natural gas to hydrogen appears to be a viable option for very small
scale hydrogen refueling appliances. A good deal of experimental and analytical design
work is required to develop such systems, but they should meet the important requirements
for this application.</p> / Master of Engineering
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/44543 |
| Date | 05 September 2009 |
| Creators | Lomax, Franklin D. |
| Contributors | Mechanical Engineering, Nelson, Douglas J., Jaasma, Dennis R., Vandsburger, Uri |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Master's project |
| Format | BTD, application/pdf |
| Relation | LD5655.V851_1997.L663.pdf |
Page generated in 0.0015 seconds