Return to search

The development of a Hardware-in-the-Loop test setup for event-based vision near-space space objects.

The purpose of this thesis work was to develop a Hardware-in-the-Loop imaging setup that enables experimenting with an event-based and frame-based camera under simulated space conditions. The generated data sets were used to compare visual navigation algorithms in terms of an event-based and frame-based feature detection and tracking algorithm. The comparative analyses of the feature detection and tracking algorithms were used to get insights into the feasibility of event-based vision near-space space objects. Event-based cameras differ from frame-based cameras by how they produce an asynchronous and independent stream of events caused by brightness changes at each pixel instead of capturing images at a fixed rate. The setup design is based on a theoretical framework incorporating optical calculations. These calculations indicating the asteroid model needed to be scaled down by a factor of 3192 to fit inside the camera depth-of-view. This resulted in a scaled Bennu asteroid with a size of 16.44 centimeters.The cameras under testing conducted three experiments to generate data sets. The utilization of a feature detection and tracking algorithm on both camera data sets revealed that the absolute number of tracked features, computation time, and robustness in various scenarios of the frame-based camera algorithm outperforms the event-based camera algorithm. However, when considering the percentages of tracked features relative to the total detected features, the event-based algorithm tracks a significantly higher percentage of features for at least one key frame than the frame-based algorithm.  The comparative analysis of the experiments performed in space-simulated conditions during this project showed that the feasibility of an event-based camera using solely events is low compared to the frame-based camera.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-98015
Date January 2023
Creatorsvan den Boogaard, Rik
PublisherLuleå tekniska universitet, Rymdteknik, Aalto University
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0023 seconds