Communication has become a bottleneck for modern microprocessors and multi-core chips because metal wires don't scale. The problem becomes worse as the number of components increases and chips become bigger. Traditional Systems-on-Chips (SoCs) interconnect architectures are based on shared-bus communication, which can carry only one communication transaction at a time. This limits the communication bandwidth and scalability. Networks-on-Chip (NoC) were proposed as a promising solution for designing large and complex SoCs. The NoC paradigm provides better scalability and reusability for future SoCs, however, long-distance multi-hop communication through traditional metal wires suffers from both high latency and power consumption. A radical solution to address this challenge is to add long-range, low power, and high-bandwidth single-hop links between distant cores. The use of optical or on-chip RF wireless links has been explored in this context. However, all previous work has focused on regular mesh-based metal wire fabrics that were expanded with one or two additional link types only for long-distance communication.
In this thesis we address the following main research questions to address the above-mentioned challenges: (1) What library of different link types would represent an optimum in the design space? (2) How would these links be used to design an application-specific NoC architecture? (3) How would applications use the resulting NoC architecture efficiently? We hypothesize that networks with a higher degree of heterogeneity, i.e., three or more link types, will improve the network throughput and consume less energy compared to traditional NoC architectures. In order to verify our hypothesis and to address the research challenges, we design and analyze optimal heterogeneous networks under different realistic traffic models by considering different cost and performance trade-offs in a comprehensive technology-agnostic simulation framework that uses metaheuristic optimization techniques. As opposed to related work, our heterogeneous links can be placed anywhere in the network, which allows to explore the entire search space. The resulting application-specific networks are then analyzed by using complex network techniques, such as community detection and small-worldness, to understand how heterogeneous link types are used to improve the NoCs performance and cost. Next, we use the application-specific networks as a target architecture for other applications. The goal is to evaluate the performance of our new NoCs for applications they have not been designed for by finding optimal resource allocations.
Our results show that there is an optimal number of heterogeneous link types for each set of constraints and that networks with three or more heterogeneous link types provide significantly higher throughput along with lower energy consumption compared to both homogeneous link type and regular 2D mesh networks under three different traffic scenarios. Our evolved networks with three different technology-driven link types, namely metal wires, wireless, and optical links, provide 15% more throughput and fourteen times less energy consumption compared to homogeneous link type network. When ten different abstract link types are used in the design, 12% more throughput and 52% less energy consumption are obtained compared to networks with three different technology-driven link types. This shows that heterogeneous NoC designs based on traditional metal wires, wireless, and optical links, occupy a non-optimal spot in the entire design space. Our results further show that heterogeneous NoCs scale up significantly better in terms of performance and cost compared to mesh networks. We uncovered that network communities evolve robustly and that heterogeneous link types are efficiently establishing inter- and intra-subnet connections depending on their link type properties. We also show that mapping an application on our application-specific NoC architecture provides on average 45% more throughput at 70% less energy consumption compared to regular 2D mesh networks. The NoCs are therefore not only good for the application they were designed for, but for a broad range of other applications as well.
| Identifer | oai:union.ndltd.org:pdx.edu/oai:pdxscholar.library.pdx.edu:open_access_etds-1996 |
| Date | 01 January 2013 |
| Creators | Chung, Haera |
| Publisher | PDXScholar |
| Source Sets | Portland State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Dissertations and Theses |
Page generated in 0.0017 seconds