As wide-bandgap devices continue to experience deeper penetration in commercial applications, there are still a number of factors which make the adoption of such technologies difficult. One of the most notable issues with the application of wide-bandgap technologies is meeting existing noise requirements and regulations. Due to the faster dv/dt and di/dt of SiC devices, more noise is generated in comparison to Si IGBTs. Therefore, in order to fully experience the benefits offered by this new technology, the noise must either be filtered or mitigated by other means.
A survey of various DC/DC topologies was conducted in order to find a candidate for a battery interface in a UPS system. A three-level NPC topology was explored for its potential benefit in terms of noise, efficiency, and additional features. This converter topology was modeled, simulated, and a hardware prototype constructed for evaluation within a UPS system, although its uses are not limited to such applications. A UPS system is a good example of an application with strict noise requirements which must be fulfilled according to IEC standards.
Based on a newly devised mode of operation, this converter was verified to produce no common-mode voltage under ideal conditions, and was able to provide a 6 dB reduction in common-mode voltage emissions in the UPS prototype. This was done while achieving a peak efficiency in excess of 99% with the ability to provide bidirectional power flow between the UPS and battery backup. The converter was verified to operate at the rated UPS conditions of 20 kW while converting between a total DC bus voltage of 800 V and a nominal battery voltage of 540 V. / Master of Science / As material advancements allow for the creation of devices with superior electrical characteristics compared to their predecessors, there are still a number of factors which cause these devices to see limited usage in commercial applications. These devices, typically referred to as wide-bandgap devices, include silicon carbide (SiC) transistors. These SiC devices allow for much faster switching speeds, greater efficiencies, and lower system volume compared to their silicon counterparts. However, due to the faster switching of these devices, there is more electromagnetic noise generated. In many applications, this noise must be filtered or otherwise mitigated in order to meet international standards for commercial use. Consequently, new converter topologies and configurations are necessary to provide the most benefit of the new wide-bandgap devices while still meeting the strict noise requirements. A survey of topologies was conducted and the modeling, design, and testing of one topology was performed for use in an uninterruptible power supply (UPS). This converter was able to provide a noticeable reduction in noise compared to standard topologies while still achieving very high efficiency at rated conditions. This converter was also verified to provide power bidirectionally—both when the UPS is charging the battery backup, and when the battery is supplying power to the load.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/93176 |
| Date | 16 August 2019 |
| Creators | Rankin, Paul Edward |
| Contributors | Electrical Engineering, Burgos, Rolando, Boroyevich, Dushan, Lai, Jih-Sheng |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds