The purpose of this dissertation is to design identification methods for identifying a permanent magnet synchronous motor. The whole identification and motor control is carried out in d-q coordinates, and the program used for processing and control was the matlab simulink, together with the real time platform DSpace. The work focuses on two main areas of identification, off-line identification and on-line identification. For offline identification the frequency analysis was used with the lock rotor test to get three main parameters. They are the quadrature and direct inductances and stator resistance. In the online mode, the identified parameters were extended to magnet flux _f identified by MRAS method. The remaining parameters were again identified by frequency analysis, which was adapted into online mode, and simultaneously applied to the identification of several part in one time. The next method is Newton method, which is used for estimating stator resistance of the motor, without the need to apply any signal.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:263353 |
| Date | January 2017 |
| Creators | Veselý, Ivo |
| Contributors | Bobál, Vladimír, Janeček, Eduard, Blaha, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds