Return to search

Microstructural Evolution and Mechanical Response of Materials by Design and Modeling

Mechanical properties of structural materials are highly correlated to their microstructure. The relationship between microstructure and mechanical properties can be established experimentally. The growing need for structural materials in industry promotes the study of microstructural evolution of materials by design using computational approaches. This thesis presents the microstructural evolution of two different structural materials. The first uses a genetic algorithm approach to study the microstructural evolution of a high-temperature nickel-based oxide-dispersion-strengthened (ODS) alloy. The chosen Ni-20Cr ODS system has nano Y2O3 particles for dispersion strengthening and submicron Al2O3 for composite strengthening. Synergistic effects through the interaction of small dispersoids and large reinforcements improved high-temperature strength. Optimization considered different weight factors on low temperature strength, ductility, and high temperature strength. Simulation revealed optimal size and volume fraction of dispersoids and reinforced particles. Ni-20Cr-based alloys were developed via mechanical alloying for computational optimization and validation. The Ni-20Cr-1.2Y2O3-5Al2O3 alloy exhibited significant reduction in the minimum creep rate (on the order of 10-9 s-1) at 800oC and 100 MPa. The second considers the microstructural evolution of AA 7050 alloy during friction stir welding (FSW). Modeling the FSW process includes thermal, material flow, microstructural and strength modeling. Three-dimensional material flow and heat transfer model was developed for friction stir welding process of AA 7050 alloy to predict thermal histories and extent of deformation. Peak temperature decreases with the decrease in traverse speed at constant advance per revolution, while the increase in tool rotation rate enhances peak temperature. Shear strain is higher than the longitudinal and transverse strain for lower traverse speed and tool rotation rate; whereas for higher traverse speed and tool rotation rate, shear and normal strain acquire similar values. Precipitation distribution simulation using TC-PRISMA predicts the presence of η' and η in the as-received AA 7050-T7451 alloy and mostly η in the friction stir welded AA7050 alloy, which results in the lower predicted strength of friction stir welded alloy. Further, development of modeling assists in process optimization and innovation, and enhances the progression rate. Accelerating the development process requires coupling experimental methods with predictive modeling. The overall purpose of this work was to develop an integrated computational model with predictive capabilities. In the present work, an application tool to predict thermal histories during FSW of AA7050 was developed using COMSOL software.

Identiferoai:union.ndltd.org:unt.edu/info:ark/67531/metadc984205
Date05 1900
CreatorsDutt, Aniket Kumar
ContributorsBanerjee, Rajarshi, 1972-, Young, Marcus L., Mukherjee, S. (Sundeep), Xia, Zhenhai, 1963-, Mishra, Rajiv S.
PublisherUniversity of North Texas
Source SetsUniversity of North Texas
LanguageEnglish
Detected LanguageEnglish
TypeThesis or Dissertation
Formatix, 130 pages, Text
RightsPublic, Dutt, Aniket Kumar, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved.

Page generated in 0.0023 seconds