This thesis presents three methods to estimate and locate damage in framed buildings, simply-supported beams and cantilever structures, based on experimental measurements of their fundamental vibration modes. Numerical simulations and experimental essays were performed to study the effectiveness of each method. A numerical simulation of a multi-storey framed building, a real bridge and a real chimney were carried out to study the effectiveness of the methodologies in identifying damage. The influence of measurement errors and noise in the modal data was studied in all cases. To validate the experimental effectiveness of the damage estimation methods, static and dynamics tests were performed on a framed model, a simply supported beam, and a cantilever beam in order to determine the linear behavior changes due to the increase of the level of damage. The structural identification algorithms during this thesis were based on the knowledge type of the stiffness matrix or flexibility matrix to reduce the number of modal shapes and required coordinates for the structural assessment. The methods are intended to develop tools to produce a fast response and support for future decision procedures regarding to structures widely used, by excluding experimental information, thereby allowing a cost reduction of extensive and specific testing
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-00470540 |
| Date | 22 February 2008 |
| Creators | Garcés, Francisco |
| Publisher | Université Paris-Est |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0014 seconds