In a recent investigation conducted by the United States Air Force, the mechanical failure of the aileron lever, manufactured from 2014-T6 aluminum, caused the fatal mishap of a T-38 trainer aircraft. In general the locations of cracks are unknown and must be determined by simulation. In this study we propose to use a continuum damage modeling approach to determine the degradation and damage in a material as the number of cycles of loading increases. This approach successfully predicts the location of crack initiation, propagation path, and propagation rate. A stress-based model in conjunction with the successive initiation technique is utilized.
Successive initiation is based on the idea that damage will accrue in a material. Each element inside a new material will have a value of 0 damage assigned to it. Over time, the damage that occurs due to stresses on individual elements will add until the damage reaches a value of 1. At that point, failure of the element will occur. A code was developed in ANSYS that can draw, mesh, and apply appropriate forces on the aileron lever for successive runs. By using the S-N curve for the 2014-T6 aluminum material, the material damage constants are found. This stress-based damage model is then used to determine the state of damage in each element. Each time the elements are stressed, a particular amount of damage will occur. When an element reaches a specific amount of damage, ANSYS will "kill" the element, resulting in the element no longer adding to the stiffness matrix of the material.
Variability is a common occurrence in all aspects of engineering such as manufacturing, testing, and loading. A Monte Carlo simulation is used to determine the sensitivity of the results to variability of input parameters by ± 15%. Input parameters include loads, material properties and damage model constants. The Monte Carlo simulation indicates the only significant input in the initiation life of the material is the exponential value in the stress-based fatigue life equation. Material properties and load variations in the ± range will not significantly change the life prediction results.
Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-1743 |
Date | 01 May 2010 |
Creators | Gyllenskog, James D. |
Publisher | DigitalCommons@USU |
Source Sets | Utah State University |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | All Graduate Theses and Dissertations |
Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0011 seconds