The aim of this study is to evaluate a methodology for modeling the influence of crystallographic grain orientation on key parameters in normal and sliding contacts. The simulations of interfering cylindrical asperities, using finite element analysis, were conducted using two different plasticity models for copper: a conventional isotropic, homogeneous J2 plasticity model and a continuum crystal plasticity model. A normal contact study was conducted in which crystallographic orientation effects on different parameters were investigated. The model was then adapted for sliding contacts, which allowed other parameters such as energy dissipation to be investigated. Using crystal plasticity, the dependence of crystallographic orientation on plastic deformation and energy dissipation can be determined. The relative trends predicted using crystal plasticity are consistent with experiments that show friction depends on crystallographic orientation when plastic deformation is one of the primary energy dissipation mechanisms.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/24713 |
| Date | 19 May 2008 |
| Creators | Dawkins, Jeremy James |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds