This document deals with the development of drilling tools by means of CAD and CAE technologies. At first, a brief overview of various design procedures of 3D drill models is presented, possibilities of measurement of force and moment loading during drilling are mentioned, a chip formation mechanism is briefly described and then a list of commonly used explicit (mesh) finite element methods used for cutting simulations is presented. A meshless SPH method have been selected for this work. Although it is able to handle the large deformations easily, it has been used for cutting simulations very rarely and only an orthogonal cutting simulations related information can be found in scientific databases. It has been demonstrated on the orthogonal cutting simulation of A2024-T351 alloy that was also the starting point for SPH simulation of drilling. The following is a decription of the design, simulation and prototyping of new drilling tools - drills with three and two cutting edges and an internal chip channel. This document is focused in detail on the variant with two cutting edges for which SPH drilling simulation has also been performed. Some drawbacks related to more precise chip simulation demands have been revealed, especially a rapid increase in number of SPH elements followed with prolongation of a computational time. Information related to the design of the drilling head with two cutting edges were then used to create the patent application.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234189 |
Date | January 2013 |
Creators | Madaj, Martin |
Contributors | Janáč, Alexander, Prokop, Jaroslav, Píška, Miroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds